Our water test online interprets the chemical readings for your pool, and advises which chemicals you need and how much to add:
Clarity Filter cleaner is designed to remove dirt, oil, body fats, grease and filth from all types of filters.
Filter Cleaner can also be used on a sponge to remove these products at the waterline of your pool or spa. Use it every 6 weeks or more often for pools/spas that have a lot of bathers.
Main Benefits:
Improved Filtration:
Dirty filters dont work properly and the contaminants in the filter affect the water quality.
All filter types:Suitable for salt water or fresh water pools of any size.
Instructions for use:
D.E. and Cartridge Filters:Remove elements from the filter and spraywith filter cleaner.
Agitate with brush then soak in a 1:20 solution of FILTER CLEANER and water in a plastic bucket.
Leave to soak for 30-60 min.Hose filter off with highest pressure on hose until clean and replace elements into the filter.Sand Filters:Backwash filter and close inlet valves.
With the filter off, remove the Multiport Valve.
Add the FILTER CLEANER to the sand filter at the rate of 500mls per 35,000 litre pool.
Replace the Multiport Valve.
Leave overnight, DO NOT run the filter.
The following day, backwash to waste until the sight glass runs clear (approx. 5-15mins).
Handling Advice
Wear protective clothing, gloves, eye/face protection.
Wash hands face and all exposed skin thoroughly after handling.